All kinds of Construction Chemical one stop Solution

3D Epoxy Flooring– How to Install

3D Epoxy Flooring– How to Install

Installation of epoxy flooring 3D murals requires a lot of experience and does not tolerate even the slightest error, so the best option would be to hire a professional contractor. Advance Industrial Coatings has extensive experience installing epoxy/ polyurethane floors, feel free to call us at +8802-9121392, Mobile: +8801715289292,, to, Office 553 Shahinbag, Tejgaon, Dhaka – 1215 request a free consultation and project estimate.

But if you are a very handy person and would like to install the epoxy flooring design by yourself, you can follow the following installation steps:
Test the slab for moisture and vapor emissions. Moisture can cause adhesive failures, promote mold, and mildew growth and result in curling or bubbling.
Fully prepare the substrate surface. Use diamond grinding tools or sanding tools to prep the entire concrete floor. Patch as needed so there were no cracks and no bevels, and the entire surface must be perfectly smooth. Make sure to cover and tape the surrounding area.
Auto scrub and vacuum the floor to completely clean the surface. There shouldn’t be even the tiniest dust. Check the humidity. Humidity throughout the area mustn’t exceed 4%, otherwise, in a week or two the beautiful newly installed floor will peel off. Apply the self-leveling epoxy primer.
Install the epoxy flooring 3D mural. If the basis of the pattern chosen is a 3D floor mural, make sure bonding to the substrate was nowhere folds or creases.
Install 2 layers of clear epoxy or more often, polyurethane to build a transparent layer of an epoxy coating over the 3D floor mural. This layer will provide the desired perception of depth as well as the protection of the 3D floor mural. Such a layer should be installed with even more attention to detail and much care. All specks of dust, hairs, etc. need to be removed. If necessary, apply a topcoat protective sealer.

Contact Us